Dry-Break
Nominal Diameter
25 = 490 mm²
25 = 490 mm²
RECTUS Series
225KL
225KL
Chart
Technical Description
The 225KL coupling system was developed for the chemical and beverage industries for filling and draining containers. There is no leakage loss whatsoever during the connecting as well as the disconnecting process. The EPDM seals conform to the FDA regulations.
Advantages
High flow rates, easy to clean, simple to dismantle. Leakage in no way. Easy to maintain concerning autoclaving and sterilisation. Moving parts are encapsulated and external to the product flow. The screwed connection allows manual connection even at a pressure of 4 bar.Working Pressure
PB = 16 bar, maximum staticworking pressure with safety
factor of 4 to 1.
Working Temperature*
-40°C up to +120/150°C (EPDM)depending on the medium.
*At a temperature below
-40°C and above +150°C special
seals are available on request.
| Material Coupling |
Standard | |||
|---|---|---|---|---|
| Cap Nut Valve Body Spring Plate Valve Locking Ring Spring Seals |
AISI 316 L AISI 316 L AISI 316 L AISI 316 L AISI 301 AISI 316 Ti EPDM |
|||
| Plug | ||||
| Valve Plug Sleeve Locking Ring Valve Spring Seal Spring |
AISI 316 L AISI 316 L AISI 434 AISI 316 L AISI 316 Ti EPDM AISI 316 L |
|||
Couplings
| Connection A | Hex SW | L mm | D mm | L1 mm | L2 mm | Hex1 SW | B mm | G mm | Version | Part Number | |
|---|---|---|---|---|---|---|---|---|---|---|---|
Male Thread |
G 1 1/2 | 65 | 92,5 | 70 | 19 | Standard | 225KL AW48 EEX | ||||
Valved Plugs
| Connection A | Hex SW | L mm | D mm | L1 mm | L2 mm | Hex1 SW | B mm | G mm | Version | Part Number | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 Female Thread |
G 1 1/2 | 75 | 85,5 | 80 | 19 | 50 | Standard | 225SL IW48 EEX | |||
Couplings + Plugs
| Connection A | Hex SW | L mm | D mm | L1 mm | L2 mm | Hex1 SW | B mm | G mm | Version | Part Number | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 Female Thread |
G 1 1/2 | 75 | 148,5 | 80 | 19 | 65 | Standard | 225 AW48 IW48 EEX | |||