ISO 16028
Nominal Diameter
25 = 490 mm²
TEMA Series
IF10000
Flow Capacity Viscosity for 32cSt at 40°C as per ISO 7241/2-2015
Technical Description
The IF series plug profile is produced according to ISO Standard 16028 and is compatible with other makes of the same standard. These couplings offer an absolutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness.

Additional threads on request.

Advantages
The coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoupling. With the pressure eliminator it is possible to couple under static pressure until working pressure.

Working Pressure
See chart.

Working Temperature*
-30°C up to +100°C (NBR)
-25°C up to +200°C (FKM)
depending on the medium.

*At a temperature below -30°C and above +200°C special seals are available on request.
Material

Coupling		 Standard Stainless Steel
Coupling Body
Sleeve
Valve
Springs
Locking Balls
Seals
Valve Holder
Thread Body		 Steel, nitrocarburizing
Steel, Zinc Plated, passivated, sealed
Steel, Zinc Plated, passivated, sealed
AISI 301
AISI 420 C
NBR
Steel, Zinc Plated, passivated, sealed
Steel, Zinc Plated, passivated, sealed		 AISI 316
AISI 316
AISI 316
AISI 301
AISI 420 C
FKM
AISI 316
AISI 316
Plug
Plug Body
Valve
Springs
Seals
Valve Holder
Thread Body		 Steel, Hardened, Zinc Pl., passivated, sealed
Steel, Zinc Plated, passivated, sealed
AISI 301
PUR
Brass
Steel, Zinc Plated, passivated, sealed		 AISI 316
AISI 316
AISI 301
FKM
AISI 316
AISI 316
Pressures (Coupling/Plug)
Bursting Pressure connected
Working Pressure disconnected		 > 800 bar
200 bar		 > 800 bar
120 bar/200 bar

Couplings

  Connection A Hex SW L mm D mm D1 mm D2 mm Working press. in bar Version Seal Part Number
Female Thread
Female Thread
 G 1 55 105 60 55 200 Standard NBR IF10010
G 1 55 109 60 55 200 Stainless Steel FKM IF10010RV
G 1 1/4 55 106 60 55 200 Standard NBR IF10010-125
G 1 1/4 55 105 60 55 200 Stainless Steel FKM IF10010-125RV

Couplings for Multiplate

  Connection A Hex SW L mm L1 mm L2 mm L3 mm D mm D1 mm D2 mm Working press. in bar Version Seal Part Number
Female Thread with locking ring according to DIN 471 Standard Design
Female Thread with locking ring according to DIN 471 Standard Design
 G 1 55 105 18 5,2 15,3 59,8 65 250 Standard NBR IF10010E
G 1 1/4 55 109 20 5,2 15,3 59,8 65 250 Standard NBR IF10010-125E
                         
                         

Couplings with Pressure Eliminator

  Connection A Hex SW L mm L1 mm L2 mm L3 mm D mm D1 mm D2 mm Working press. in bar Version Seal Part Number
Innengewinde
Innengewinde
 G 1 55 143 18 60 55 250 Pressure Eliminator NBR IF10011
G 1 1/4 55 146 20 60 55 250 Pressure Eliminator NBR IF10011-125
                         
                         

Plugs

  Connection A Hex SW L mm L1 mm L2 mm L3 mm D mm D1 mm D2 mm Working press. in bar Version Seal Part Number
Innengewinde
Innengewinde
 G 1 55 89 18 60 200 Standard PUR IF10020
G 1 55 89 18 60 200 NBR IF10020N
G 1 55 93 20 60 200 Stainless Steel FKM IF10020RV
G 1 1/4 55 90 19 60 200 Standard PUR IF10020-125
G 1 1/4 55 90 19 60 200 NBR IF10020-125N
G 1 1/4 55 89 18 60 200 Stainless Steel FKM IF10020-125RV

Plugs for Multiplate

  Connection A Hex SW L mm L1 mm L2 mm L3 mm D mm D1 mm D2 mm Working press. in bar Version Seal Part Number
Female Thread with locking ring according to DIN 471 Standard Design
Female Thread with locking ring according to DIN 471 Standard Design
 G 1 65 89 18 5,2 15,3 59,8 65 200 Standard PUR IF10020E
                         
                         
                         

Plugs with Pressure Eliminator

  Connection A Hex SW L mm L1 mm L2 mm L3 mm D mm D1 mm D2 mm Working press. in bar Version Seal Part Number
Female Thread
Female Thread
 G 1 55 126 18 60 200 Pressure Eliminator NBR IF10021
G 1 1/4 55 130 20 60 200 Pressure Eliminator NBR IF10021-125
                         
                         

Plug with Pressure Elim. for Multiplate

  Connection A Hex SW L mm L1 mm L2 mm L3 mm D mm D1 mm D2 mm Working press. in bar Version Seal Part Number
Female Thread with locking ring according to DIN 471 Standard Design
Female Thread with locking ring according to DIN 471 Standard Design
 G 1 55 126 18 5,2 15,3 59,8 65 200 Pressure Eliminator PUR IF10021E
G 1 1/4 55 130 20 5,2 15,3 59,8 65 200 Pressure Eliminator PUR IF10021-125E
                         
                         

Lubrication Nipple

  Description L mm D mm Part Number
-
 Coupling 54 36 GRIF100
       
       
       

Seal-Kit

  Description Material Part Number
Coupling NBR IF10000-PSN
Coupling FKM IF10000-PSV
Coupling EPDM IF10000-PSEP
Coupling PUR IF10000-PSPU

Dust Protection

  Description L mm D mm Material Color Part Number
-
 Coupling 240 50 PVC Blue IF10016
Plug 240 50 PVC Blue IF10026